Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(1.) Download the app from the corresponding app store (Apple App Store, Google Play Store).
You will require a user account on the corresponding app store to do this.
(2.) When you start the app for the first time, either log in with your account or register.
(3.) The display of your mobile terminal device will show you all the subsequent steps required to connect
the product to the mobile device.
In addition, be sure to study all the notes on operation in the app. This will give you a better overview
of how the connection is made and how the functions are used.
3.6
Information about the app
To find out more about the app, to download it and start it, scan the QR code in the case.
3.7
Requirements to be met by cartridges
Use only the Hilti DX cartridges listed in this table, or other suitable cartridges that are compliant with the
minimum safety requirements:
•
It is a requirement for EU and EFTA countries that the cartridges must be CE-compliant and must bear
the CE mark of compliance.
•
It is a requirement for the USA that the cartridges must be compliant with the stipulations set out in
ANSI A10.3-2020.
•
It is a requirement for the non-European member states of the C.I.P. that the cartridge must have C.I.P.
approval for the DX fastening tool used.
•
It is a requirement for the remaining countries that the cartridges must have passed the firing-residues
test in accordance with EN 16264 and must have a manufacturer's declaration to this effect.
WARNING! Use of cartridges that do not meet the minimum safety requirements can lead to a build-
up of unburned powder. A sudden explosion and severe injuries to the operator and bystanders can
result. A build-up of unburned powder can be prevented only by professional cleaning by Hilti Service.
Cartridges
Ordering designation
DX 6 cartridge
DX 6 cartridge
3.8
Minimum distances and edge distances
WARNING! You must always observe certain minimum distances and spacing when driving
fasteners. They can differ, depending on the product.
For detailed information, request a copy of the Direct Fastening Technology Manual from the local
Hilti Store Store.
Fastening to steel
Always observe the following minimum distances and spacing when fastening to steel:
•
The minimum distance from the edge of the base material to the fastener must be at least 15 mm.
•
The minimum center-to-center distance between two fasteners is 20 mm.
•
The base material must have a thickness of at least 6 mm.
3.9
Information about the field of applications
See the Hilti product page for more information about the areas of application.
6
English
Color
Power level
titanium-gray
strong
black
extra-strong
2253454
*2253454*
Publicité
Table des Matières
