Bartscher MINI II Mode D'emploi page 30

WARNING! Burn hazard!
When in use, the device and oil in the chamber are very hot and the oil is
at risk of catching fire.
Do not allow the device to function for long periods of time!
When finished using the unit, turn the temperature dial counterclockwise
to the „O"position and remove the plug from its socket.
WARNING! Burn hazard!
Do not use the deep fryer with its cover on! The cover serves only as protection
against dust, and for keeping the oil hot between fryings. Prior to placing the
cover on, ensure that it is dry. If water gets into the oil chamber, this may cause
oil to splatter.
•
If the deep fryer has been accidentally turned on with too
little or no oil in the chamber, it will automatically turn
itself off at approx. 230 ° C, to protect against
overheating. If this occurs, disconnect the device by
removing its plug from the socket and leave it to cool.
•
If the device has turned off to prevent overheating, it can be
turned back on after pressing the button marked RESET.
This button is located at the rear of the device and can be
pressed using a long, thin object such as a wire (see figure).
•
Cool the device to temperature below 170 ° C and swi tch the RESET button up.
•
Next, insert the plug into a socket and turn the device on.
RESET button
- 29 -