HORI Apex Manuel D'utilisation page 6

* If you do not perform step ② after ①, the ASSIGN LED will turn off after four seconds and button assignment mode will
automatically end.
* During steps 2〜4, only the steering unit and foot pedal input are enabled.
Button input from the controller to the PlayStation
* Controller settings are stored even if the USB is disconnected.
Gradual (Steady steering)
1
LED color Green
Foot pedals
①
②
③
④
⑤
* If you do not perform step ② after ①, the ASSIGN LED will turn off after four seconds and button assignment mode will
automatically end.
* During steps 2〜3, only the steering unit and foot pedal input are enabled.
Button input from the controller to the PlayStation
* Controller settings are stored even if the USB is disconnected.
Gradual (Steady steering)
1
LED color Green
6
4 will be disabled.
®
2 3
Yellow Red
3
Program LED (Right)
sec
will turn on.
Program LED (Left) colour
3
will change to indicate
sec
the selected rotation angle.
Sensitivity value increases by pressing up on the Directional Pad.
Sensitivity value decreases by pressing down on the Directional Pad.
Program LED (Left)
will turn off.
(The ASSIGN LED will light red when assigning buttons.)
4 will be disabled.
®
2 3
Yellow Red
Default Responsive (Easy to turn)
4 5
Purple Blue
Responsive
Gradual
Program LED (Right)
will turn off.
Default Responsive (Easy to turn)
4 5
Purple Blue
6 7
Light Blue White
Program LED (Right)
will flash.
6 7
Light Blue White