Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADDITIONAL SAFETY INSTRUCTIONS FOR SPRAY GUN
1.
Toxic vapours produced by spraying certain materials can be toxic and cause
serious damage to health. Always wear safety glasses, gloves and respirator to
prevent a toxic vapour hazard, solvent and paint coming into contact your eyes or
skin (see Fig 1).
2.
Never use oxygen, combustible or any other bottle gas as a power source as
these could cause an explosion and serious personal injury (see Fig 2).
Fig.1
3.
Sprayed fluids or solvents can be highly flammable or combustible. Please use
the tool in a well-ventilated area only, and avoid any ignition sources, such as
smoking or open flames (see Fig 3).
4.
Disconnect tool from air supply hose before doing tool maintenance and during
non operation. For emergency stops and prevention of unintended operation, a
ball valve near the gun to air supply is recommended.
5.
Use clean, dry and regulated compressed air rated at 30-50 PSI, never exceed
Fig.2
the maximum allowed operating pressure of 120 PSI (see Fig 4).
6.
Never use homogenate hydrocarbon solvents, which can chemically react with
aluminum and zinc parts. These materials are not chemically compatible with
aluminum and zinc parts.
7.
Never point spray gun at yourself or others.
Fig.3
8.
Before operating the tool, make sure all the screws & caps are securely tightened
to prevent leaks.
9.
Before painting, inspect tool to ensure free movement of the trigger and nozzle to
ensure proper tool operation.
10. Never modify the tool for other applications. Use only parts, nozzles and
accessories recommended by the manufacturer.
Fig.4
SPECIFICATIONS
This HAUSSMANN air-powered spray gun is a low pressure sprayer, ideal for household
tasks. It is designed to provide equal atomization and particle size, for all kinds of surface
painting. It has a lightweight aluminum body.
Fluid Delivery: Suction
Fluid Nozzle Diameter: 0.0315" (0.08 mm)
Optional Nozzle Diameter: 0.0315" - 0.0512" (0.8 - 1.3 mm)
Air Consumption: 4.6 CFM @ 90 PSI
Air inlet: 1/4'' (6 mm) NPT
Paint Capacity: 750 cc
Normal inlet air pressure: 30—50 PSI
17
Publicité
Table des Matières
