Adjusting The Focus; Réglage De La Mise Au Point - Samsung SDC5000 Mode D'emploi

Camescope numerique
Table des Matières

Publicité

ENGLISH
Basic Picture-Taking

Adjusting the Focus

In CAMERA Mode, the automatic focus will not engage unless the
Photo Button is pressed.
To get a good image, please verify the focus is set properly before
pressing the Photo Button firmly.
While the camera is focusing (by pressing the Photo Button
halfway down), a flashing icon
(
) will appear on the OSD (On Screen Display). A beep will be
heard once the focus is set.
1. Adjust your frame so that the subject is within the
AF frame on the LCD screen.
2. Pressing the Photo Button halfway down will set
the focus.
When the focus is set, a sound effect will play.
3. Press the Photo Button firmly to take the picture.
Notes
If the focus is not set properly, release the Photo
Button and then press the button halfway down
again.
Use MACRO Mode for recording images at close
range (under 30cm), or the proper focus will not
occur.
If the image still seems blurry, use the MF(Manual
Focus) feature.
Prise de photo simple
Réglage de la mise au point
En mode CAMERA <APPAREIL PHOTO>, la mise au point
automatique démarre lorsque vous appuyez sur la touche Photo.
Pour obtenir une bonne image, vérifiez que la mise au point a été
effectuée correctement avant d'appuyer fermement sur la touche
Photo.
Lorsque le caméscope est en cours de mise au point (en appuyant
sur la touche Photo jusqu'à mi-course), une icône (
sur l'affichage à l'écran.
Un son est émis une fois la mise au point effectuée.
1. Ajustez votre cadre afin que le sujet se trouve
SF
1 0 0 0 / 1 0 0 0
dans le cadre de mise au point automatique sur
L 2 2 7 2
l'écran LCD.
2. Appuyez sur la touche Photo jusqu'à mi-course
pour faire la mise au point.
A ce moment-là, un son est émis.
3. Appuyez fermement sur la touche Photo pour
prendre la photo.
Remarques
Si la mise au point n'a pas été effectuée
correctement, relâchez la touche Photo puis
réappuyez jusqu'à mi-course.
Utilisez le mode MACRO <MACRO> pour
enregistrer des images rapprochées (à moins
de 30cm), sinon la mise au point ne sera pas
exécutée correctement.
Si l'image semble toujours floue, utilisez la
fonction de mise au point manuelle.
FRANÇAIS
) clignote
91
91

Publicité

Table des Matières
loading

Table des Matières