Reset Function - Audio-Technica ATH-DSR9BT Manuel De L'utilisateur

Using the product

Reset function

If the product does not operate properly or if other
malfunctions occur, pressing the reset button should
resolve any problem you are experiencing. If the problem
persists, please contact your local Audio-Technica dealer.
Pressing the reset button does not change any of your
settings (pairing information, volume setting, etc.).
• Do not use excessively hard metal tools or sharply
pointed tools, nor press the reset button with
excessive force. Doing so may result in malfunction.
Indicator lamp display
The product's indicator lamps indicate the product's status as explained below. For information about how the indicator
lamps indicate the battery (charging) status, see "Charging the battery" (p.5) . For information about how the indicator
lamps indicate the codec, see "Compatible codecs" (p.10) in "Listening to audio".
Status
Pairing (searching for devices)
Waiting for connection
Connecting
Receiving a call
Talking on a call
ATH-DSR9BT_Manual_Book.indb 12
Indicator lamps
Lamp display Light pattern
Each lamp turns on in order from right to left → All
lamps turn off → Each lamp turns on in order from left
to right → All lamps turn off → Pattern repeats
Flashes every 3 seconds
Each lamp turns on in order from right to left → All
lamps turn off for 3 seconds → Each lamp turns on
in order from left to right → All lamps turn off for 3
seconds → Pattern repeats
Flashes
Flashes every 3 seconds
Press
White Blue Off
2016/11/01 17:42
E
N
12