HAYGAIN FORAGER Manuel D'utilisation page 9

How to Build The Haygain Forager
®
10
Removing the Regulator:
Unclip each regulator arm from the metal
ring. Be careful with the last attached arm –
hold the metal ring and slowly slide it to the
bottom of The Forager walls.
Then bend each regulator arm upwards
and back, freeing them from the slats in
The Forager Walls. Once all arms are free,
remove regulator from The Forager.
Follow along with our video tutorial
Viewable on YouTube at: bit.ly/ForagerInstructions
9 © Haygain