HAYGAIN FORAGER Manuel D'utilisation page 7

7
4
On arrival the 4 rubber wedges will be
inside the top ring. Pull each wedge down
as indicated by the arrow on the right of
each wedge so they are dangling down. Be
careful not to detach fully, this creates space
in the top ring to enable the next step.
5
Securing the top ring:
Step 1: Line up the 4 wedges of the top ring
with the middle of the 4 walls.
Step 2: Squeeze the inner flaps located
on the underside of the top ring in
diagonal pairs and push down which
will release the flaps.
6
Mount the 4 wedges - each wedge should
click into place becoming completely flush
with the top ring.
Feel for a 'click' to ensure the wedge
is locked snugly into the top ring.
Lock in
How to Build The Haygain Forager
®
© Haygain