Table Des Matières; General Maintenance; Before Starting - Canon CP1013D II Mode D'emploi

CONTENTS

GENERAL MAINTENANCE

BEFORE USING THE PRINTER FOR FIRST TIME

BEFORE STARTING

DECIMAL POINT SELECTOR SWITCH
ROUNDING SWITCH
CONSTANT SWITCH
ACCUMULATION SWITCH
ITEM COUNT / AVERAGE CALCULATION SWITCH
PRINT / PAIR MODE CALCULATION SWITCH
STORE / RECALL MEMORY KEY
RECALL ITEM COUNT / ITEM PLUS KEY
OVERFLOW FUNCTION
SPECIFICATIONS
CARRYING HANDLE
REPLACING THE INK RIBBON
INSTALLING PRINTING PAPER
CALCULATION EXAMPLE
GENERAL MAINTENANCE
Do not use or leave the calculator under direct sunlight. Areas subject to rapid
temperature changes, high humidity, dust and dirt should also be avoided.
Use a dry cloth to clean the casing of the unit. Do not use water or detergents.
Only use the printer when the paper roll is loaded.
Avoid using the calculator in places where there are iron filings, as this may
affect the electrical circuits of the calculator.
Do not place anything on top of the machine, particularly on top of the printer
mechanism.
Turn the calculator off before removing the plug from the electrical outlet.
In case of electrical fault (i.e. smoke), disconnect the plug from the electrical
point immediately. The socket outlet should be near to the equipment and
easily accessible.
BEFORE USING THE PRINTER FOR FIRST TIME
Remove the tape on the ink ribbon of the
calculator before use.
BEFORE STARTING
1) Plug in AC power cord. (Figure a )
2) Turn power switch on. (Power switch is located on
the right side of the cabinet.) "C" will automatically
be printed on the paper if the switch is set to print.
(Figure b )
1)
1
P.1
P.1
P.1
P.2
P.2
P.2
P.2
P.2
P.3
P.3
P.4
P.4
P.4
P.4
P.5
P.5
P.16-24
2)
a
b