Installation Instructions - Duux Coolseal Mode D'emploi

Installation instructions

C O O L S E A L M O B I L E A I R C O W I N D O W S E A L K I T
1
First open the window and
clean the surfaces to be
bonded from dust and fat
on the window frame and
casement. Open the Velcro
fastener and stick the Velcro
strap to the window frame
(side A).
Never stick it to the contact
surface of the window seal
(window must still be able
to close!)
4
Close the window and make
sure that the Coolseal isn't
damped.
Window frame
Velcro strap
inside or outside
b)
a)
A B
Casement
Velcro strap
2
Stick Velcro strap (side B) to
the a) outside or b) inside of
the window casement (side of
the window handle).
Be sure that the window
is still able to close. Before
sticking together, make sure
that the sticky tape doesn't
damage the window frames!
5
Stick the narrow side B (zipper
is closed) from the middle to
the left and right side or to
the up and down side tot he
casement.
B - Always attach the narrow side of
B
the Coolseal to the casement.
A - Always attach the wide side of the
A
Coolseal to the window frame.
Mounting direction
Velcro strap
3
First stick the wide side A
(zipper is closed) with the open
window from the middle to the
left and right side or to the up
and down side to the window
frame.
6
Open window slightly and pinch
the exhaust hose in the Cool-
seal by using the zipper.
B
A