Setting The Time Zone; Example; View Second Time Zone; Temperature Unit ( C/ F) º º And Countdown Timer - iTronics IR 380 Manuel D'instruction

Setting the time zone:

Press and hold MODE during normal time display mode till language of the day
starts blinking. Press MODE repeatedly till ZONE is active. Press +/ C/ F or
-/RCC/ZONE buttons to adjust hours, press MODE button to confirm.

13.1 Example

Suppose you are in Hamburg now, and want to set New York as the second time
zone. New York is located in the time zone -5, and Hamburg is located in time
zone +1. New York is 6 hours west of Hamburg, set the time zone to -6.
13.2 View the second time zone
You can now switch between the local time zone and the time of selected zone
by briefly press the the -/RCC/ZONE button under the temperature mode. When
the time is being displayed for the respective zone the Zone symbol appears to
the right above the second display.
14. Temperature unit ( C/ F)
Briefly press MODE to switch between temperature and countdown timer mode.
EN
º º and countdown timer
-17-
14.1 Temperature unit ( C/ F)
Briefly press MODE, temperature in Celsius appears. Press +/ C/ F button can
switch between Celsius and Fahrenheit.

14.2 Countdown timer

Briefly press MODE again to enter the timer mode, TIMER appears. Set the
timer by pressing +/ C/ F button to increase countdown hours to maximum 23
hours, press -/RCC/ZONE button to increase countdown minutes to maximum
59 minutes. After settings, press SNOOZE/START/STOP to start or stop the
timer countdown.

15 Alarm and snooze

Repeatedly press ALARM button to select alarm 1 (A1), Alarm 2 (A2). Or

Appointment alarm (AP).

15.1 Alarm 1/2 (A1/A2)
º º
Select the desired alarm (A1 or A2) with ALARM button. Repeatedly press
ALARM ON/OFF to ...
Activate the alram for all weekdays (M-F)
Activate the alram for the weekend (S-S)
Activate the alram for all days (M-F/S-S)
Pressed and hold ALARM to enter setting mode. The hour of the alarm will
appear blinking on the display. Set the hous by pressing either the +/ C/ F or
-/RCC/ZONE and confirm your setting by pressing ALARM. Set the minute in
the same way.
15.2 Appointment alarm (AP)
Select the appointment alarm (AP) with the ALARM. The Appointment alarm
can be activated or deactivated by pressing ALARM ON/OFF button. If the
appointment alarm is activated, AP will appear below the moon phase. Select
the Appointment alarm (AP) With ALARM. Press and hold ALARM to enter
setting mode. The year of the appointment alarm will appear blinking on the
display. Set the year by pressing either the +/ C/ F or -/RCC/ZONE and confirm
your setting wby pressing ALARM. Set the month, date, hour and minute in the
same way.
º º
º º
º º
-18-
º º
º º
EN