Technical Data - LaserLiner VideoFlex G3 Mode D'emploi

Connect power supply/battery charger
To charge the unit, plug the supplied power supply/battery charger into charging socket „13"
and connect it to a corresponding power source.

Technical Data

VideoFlex G3 10 m
Camera head / Cable
Camera focus
Length of flex cable
Weight incl. battery pack and flex cable
VideoFlex G3 5 m
Camera head / Cable
Camera focus
Length of flex cable
Weight incl. battery pack and flex cable
VideoFlex G3 1,5 m
Camera head / Cable
Camera focus
Length of flex cable
Weight incl. battery pack and flex cable
Screen type
Camera resolution
Display resolution
Image/Video resolution
Image format/Video format
LED
Zoom
Memory
Port
Connections
Power supply
Charging time
Operating time
Operating conditions
Storage conditions
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=AGG
ø 9 mm, IP 68 (immersion depth 2 m, 60 min.)
F1 cm - F6 cm for 9 mm standard camera
10 m
1,6 kg
ø 9 mm, IP 68 (immersion depth 1,5 m, 60 min.)
F1 cm - F6 cm for 9 mm standard camera
5 m
0,83 kg
ø 6 mm / 9 mm, IP 68 (immersion depth 1,5 m, 60 min.)
F1 cm - F6 cm for 6 mm / 9 mm standard camera
1,5 m
0,5 kg / 0,56 kg
3,5" TFT colour display
640 x 480 pixels
320 x 240 pixels
720 x 480 pixels
JPEG / AVI
10 brightness levels
1.5x digital zoom in 10% increments
Supports up to max. 8 GB SDHC card
Mini USB
Micro-SD, Analog-video
Li-Ion pack battery 3.7V / 1.7Ah / 5V / 1A power supply unit
approx. 4 h
approx. 4 h
0°C ... 45°C, Max. humidity 20 ... 85% rH,
no condensation, Max. working altitude 4000 m
above sea level
-10°C ... 60°C, Max. humidity 80% rH
VideoFlex G3
Technical revisions reserved. 18W36
EN 21