Fracarro 3DG FLEX Instructions D'emploi page 5

1. OPERATING INSTRUCTIONS
Installation must be performed by qualified technicians according to the laws and local safety
regulations in force. The product must be used in accordance with the Operating Instructions
described within this manual.
Installation warning
The product must be installed into the cradle of the 3DGflex headend and must never be
supplied directly by a power supply cable.
• Install the product in an indoor dry location, making sure that no liquid or water can
reach the unit.
• Humidity and condensation could damage the product. In the event of condensation,
wait until the product is completely dry before using it.
• Do not install the product above or near sources of heat or in dusty places or locations
where it might come into contact with corrosive substances.
• Leave some space around the product to ensure proper ventilation. High temperatures
can negatively affect the operation and the life span of the product.
• To avoid getting hurt, install the product in the cradle as explained in the assembly
instructions of Chapter 2.
In accordance with European Directive 2004/108/EC (EMC), the product must be installed by
using the devices, cables and connectors that comply with the requirements of this directive
relevant to the fixed installations.
Fracarro Radioindustrie S.p.A. declines all civil or criminal liability due to the violation of the
legal regulations in force and due to any improper use of the product by the installer, user or
third parties.
Earthing the antenna installation
The cradle where the product is installed must be connected either directly or by the rack to
the ground electrode of the antenna installation according to the standard EN60728-11. We
recommend following the provisions of standard EN60728-11 and therefore not to connect
the cradle of the rack to the earthing of the power supply network.
IMPORTANT: Never take off the module covers; live components can be accessible when the
covers are opened. Only qualified and authorised technicians can open the product. Do not
repair the product; otherwise the warranty will no longer be valid.
5