Technical Specifications - Velleman CV045 Notice D'emploi

Voltage drop according to cable length (24AWG)
Transmission distance
50 m / 160 ft
100 m / 320 ft
150 m / 500 ft
200 m / 650 ft
300 m / 1000 ft
7.

Technical Specifications

camera connector
monitor/DVR connector
video impedance
maximum cable length
operating temperature
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 25/05/2012
Transmission voltage
(12VDC, 0.5A)
13.5 V
15.5 V
17.0 V
18.5 V
22.0 V
video
power supply
video
power supply
BNC
UTP (2 push-pins terminal block)
250m
-20°C ~ 70°C
230VAC / 50Hz
4-channel balun receiver with power
supply built-in
passive video and power baluns
4-channel balun receiver with power
supply built-in
passive video and power baluns
CV045
Transmission voltage
(12VDC, 1.0A)
15.5 V
18.5 V
22.0 V
25.5 V
32.0 V
BNC male / push-pin terminal
male 2.1mm DC plug
BNC male / push-pin terminal
12V/5A power supply built-in
75 ohms unbalanced
100 ohms balanced
250 x 170 x 45mm
61 x 29 x 21mm
1600g
40g
5
Transmission voltage
(12VDC, 1.5A)
17.0 V
22.0 V
27.0 V
32.0 V
42.0 V
©Velleman nv