SCS Sentinel SOFIA M7E8 TOP B Manuel D'installation Et D'utilisation page 20

ENGLISH
4
USING THE ELEMENT
1) GENERAL USING
COMMUNICATING WITH YOUR VISITOR
When the visitor presses the camera call button, the interior monitor rings and the video switches on.
To pick up press and you may communicate with your visitor. Communication time is a maximum of 60
seconds. You may adjust the exterior panel's loudspeaker volume by turning the volume button on the back of
the street panel.
VIEWING THE OUTSIDE
When your visitor presses the call button, their image automatically appears on the interior monitor.
To view the outside without pressing the call button, simply press . The image will remain on screen for
around 1 minute. To close the image before this press the button.
ACTIVATING THE LOCK
To activate the electric lock, press . The lock will be open for around 3 seconds. (Default programming).
To extend this opening time, move the jumper on the back of the street panel.
3 seconds = 6 seconds = 9 seconds =
ACTIVATING THE AUTOMATED GATE SYSTEM
To activate the automated gate system, press ; if you are speaking, you can keep talk.
ADJUSTING YOUR MONITOR
- Press Menu (button on side of monitor) 1 times: calibration image
- Press Menu (button on side of monitor) 2 times: calibrating lighting image
- Press Menu (button on side of monitor) 3 times: calibrating contrast
- Press Menu (button on side of monitor) 4 times: calibrating brightness
Then adjust with the arrows and according to the desired light intensity.
To adjust your monitor's volume, turn the button VOL placed
on the right side of your monitor to the volume you want.
To choose you ring tone, press and select your ring tone
(choice of 9).
2) USING THE TOUCH SCREEN
Home screen
1- Reading the photo album
2- Time
3- Date
4- Alarm
5 - Settings
6 Viewing images taken by the camera
Time setting: Press Photo album on the screen to enter the menu
3) PHOTO ALBUM
Photo album interface settings
The default screen displays the following: the last album viewed,
the time, the calendar and a background music.
To make rapid settings: press the clock
=> 1) Choose the type of time: digital or analogue
=> 2) Calendar: visible/not visible when the album is viewed
=> 3) Setting the time
=> 4) Time: visible/not visible when the album is viewed
=> 5) You can exit this menu by touching the screen outside
of the clock and calendar area