Blower Function - Samba EFFICIENT Mode D'emploi

4. Connect the hose, pipe, accessories as below picture. (The On/Off position
should be consistent with the direction of inlet).
5. The hose interface is aligned and inserted to the hose connector horizontally.
Then push to the end, clockwise rotation of 30 degrees and ensure it is fixed.
6. When pulling out hose, please rotate hose interface counterclockwise, then
pull out horizontally.
BLOWER FUNCTION: Connect the blowing accessory to the hose and insert
it into the air outlet or blower, then follow the lighting instructions.
30
ON/OFF Switch
Accesories
Hose interface
Air outlet
Blowing
accessory
Outlet (blower)
Inlet