Items Supplied; Before Initial Use; Assembly And Connection - DS Produkte 00812 Mode D'emploi

Items Supplied

1
7
6
1 Protective lid (1 x)
2 Strainer (1 x)
3 Shaft (1 x)
4 Motor unit (1 x)
Check the items supplied for completeness and the components for transport damage.
If you fi nd any damage, do not use the device but contact our customer service depart-
ment.

Before Initial Use

1. Remove any possible fi lms, stickers or transport protection from the device. Never
remove the rating plate and any possible warnings!
2. With the exception of the motor unit (4), rinse all accessories thoroughly. Follow the
instructions in the "Cleaning and Storage" chapter to do this.

Assembly and Connection

PLEASE NOTE!
■ Make sure that the connecting cable is not squashed, bent or laid over sharp edges
and does not come into contact with hot surfaces.
■ Only connect the device to a plug socket that is properly installed. The plug socket
must also be readily accessible after connection so that the connection to the mains
can quickly be isolated. The mains voltage must match the rating plate of the device.
■ The connecting cable should not hang down from the surface on which the device is
placed in order to prevent the device from being pulled down.
13
2
5
5 Juice container (1 x)
6 Adapter (1 x)
7 Press cone (1 x)
3
4
Operating instructions (1 x)
EN