Electrical Connection; Startup - Beem Comfort Clean Mode D'emploi

EN

Electrical connection

For safe and trouble-free operation of the
machine, the following instructions must
be observed for the electrical connection:
Before connecting the machine, com-
‹
pare the connection data (voltage and
frequency) on the rating plate with
those of your mains power supply. The
data must correspond in order to avoid
damage to the machine. If in doubt,
ask your electrical machine retailer.
The mains socket must be protected
‹
by at least a 10 A automatic circuit
breaker.
Ensure that the mains lead is undam-
‹
aged and is not laid over sharp edges.
The mains cable must not be pulled
‹
tightly, bent or come into contact with
hot surfaces.
Route the cable to prevent risk of trip-
‹
ping.
The electrical safety of the machine
‹
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle

Startup

Unpacking
Remove the machine, all accessory
‹
parts and the user manual from the
box.
Remove all packaging materials and
‹
protective foils from the product and
the accessories before using it for the
first time.
NOTE
► Do not remove the rating plate or
any warning signs on the machine.
► If possible, keep the original packag-
ing during the guarantee period in
order to be able to pack the machine
properly in the event of a guarantee
claim. Transport damage will invali-
date the warranty/guarantee.
Check the delivery contents
Check for visible signs of damage or
‹
missing items.
Report incomplete or damaged con-
‹
tents to your supplier immediately.
Before using for the first time
Remove the cap of the shoe polish
‹
container.
Comfort Clean
15