Hkoenig GSX16 Manuel D'utilisation page 11

and let it cool down, so as to avoid burns and electrocution.
Do not immerse the base with motor in water or other
•
liquids.
Do not use corrosive cleaning agents.
•
Attention!
Do not clean the appliance with any chemicals, alkali,
abrasive or disinfecting agents, as they may damage the
surface of the appliance.
Cleaning the screw-conveyor shaft, the stainless steel
strainer, the bowl, and the pulp and juice containers:
As soon as the appliance cools down after you have
•
finished using it, wash
the components in warm water with some dishwashing
liquid.
All the components must be cleaned no later than 10
minutes after you have finished using the appliance, so as to
avoid damage to stainless steel parts and to prevent juice
residues from drying out in the appliance, which could
cause problems when it is disassembled later. Clean the
components carefully, so as not to damage them. Remove
food residues from the components with the supplied brush
after every use.
The rubber plug in the bottom part of the bowl should
•
be carefully moved aside to facilitate cleaning. After drying,
the plug must be reinstalled in its original position.
Wipe the appliance or let it dry thoroughly.
•