Built-In Installation; Combined Washer/Dryer Installation; Modifying The Door Opening Direction - Fagor SFA-8CE Guide D'installation Et D'utilisation

EN
3 / INSTALLING YOUR TUMBLE DRYER

• BUILT-IN INSTALLATION

Important :
If you are fitting the appliance underneath a worktop, you must either keep the original
laminated top, or replace it with a slimmer version using a kit available for this purpose from your
dealer. For safety reasons, the appliance must never be operated without a top.

• COMBINED WASHER/DRYER INSTALLATION

An adaptation kit is available from your dealer. This is used to mount your tumble dryer above your
washing machine.
Important :
Check with your dealer that the kit is compatible with your washing machine. For safety rea-
sons, fitting must be performed by a qualified professional.

• MODIFYING THE DOOR OPENING DIRECTION

If you wish, you can alter the direction the door opens as follows (Fig. 04 or 05).
— Remove the 4 screws in the front panel holding the hinges
— Reverse the hinge
— Refit the door on the hinge
— Reverse the hinge
— Reverse the positions of the lock
— Reverse the positions of the bolt
A
C
B
Left-hand Door
Fig. 04
A A
and fasten it back on.
A A
.
B B
and fasten it back on.
F F
and the cover
C C
.
E
F
A A B B
.
and
E E
on the machine's front face.
E
F
Right-hand door
Fig. 05
9
B
C
A