Electrical Connection; Replacing The Electric Power Cable - Fagor SFA-8CE Guide D'installation Et D'utilisation

EN
3 / INSTALLING YOUR TUMBLE DRYER

• ELECTRICAL CONNECTION

The dryer must be installed in accordance with all local codes or, in the absence of a local code :
— in the U.S.A., in accordance with the National Electric Code, ANSI/NFPA 70 - latest edition/State
and Municipal codes and/or local codes.
— in Canada, in accordance with the Canadianl Electric Code, C22.1 - latest edition/Provincial and
Municipal codes and/or local codes.
Danger :
To make the electrical connection to your appliance :
— Do not use an extension, an adapter, a multiple socket or a programmable timer.
— The plug must be easily accessible but be out of children's reach.
— If there's any doubt about the condition of your installation, contact your installer or a qualified
Brandt-approved professional.
— Never eliminate the electrical Earthing system.
The Dryer comes with a 16AWG Cord and NEMA 6-15P plug
It should be connected to a 240V, 15A, 60Hz AC 2 Phases + wire grounding power outlet (NEMA
6-15R) is necessary.
We cannot be held responsible for any incident caused by poor electrical installation.

• REPLACING THE ELECTRIC POWER CABLE

Important :
To ensure your safety, this must be carried out by the manufacturer's after-sales service
team or a qualified professional.
Advice :
In order to easily find your appliance's reference numbers in the future, we recommend
that you note them down on the "After-Sales Service and Consumer Relations" page (this page
also explains where to find these on your appliance).
Your appliance complies with UL 2158 (Electric clothes Dryer).
10