Serial Numbers; Cleaning And Maintenance - Peg-Perego carrello duette piroet Notice D'emploi

12 WHEEL REMOVAL: To remove the rear wheels: pull the
pivot outwards and remove the wheel as shown in the
figure (fig_a).
To remove the front wheels: press the tab as shown
and remove the wheel (fig_b).
13 FOLDING: apply the brake and release the seats.
To close the chassis, push the side button, lift both
levers on the handlebar (fig_a) and rotate it forward
(fig_b) until it closes (fig_c).
You can fold up the frame without releasing the Pop-
Up seats. To do this, lower the backrest of both seats
fully forward.
GANCIOMATIC SYSTEM
The Ganciomatic System is a fast and convenient
system that allows you to attach the Seggiolino
Duette/Triplette, the Primo Viaggio SL car seat, and
the Pop-Up bassinet (sold separately) to the frame's
Ganciomatic Base in one easy movement. Position
them on the Ganciomatic Base and press downwards
on the product with both hands until they lock into
place. Always apply the frame or stroller brake before
securing or releasing the products (refer to the
respective instruction manuals). Follow the directions
for specific product combinations.
WARNING: To ensure the product is stable, we
recommend always installing all the Pop-Up seats.
If for any reason you are using the product with
a single occupant, we recommend you fasten
all the seats in any case, and make sure they are
properly docked. ENSURE THE CHILD RESTRAINT IS
PROPERLY DOCKED.
The footrest may only be raised when the seat faces
out from the frame.
14 DUETTE FRAME PIROET+ 2 SEGGIOLINI DUETTE
POP-UP
Figures A, B, C and D show the positions in which the
seats may be installed.
Figure D shows the "cot" position; this is obtained by
lowering the backrest and raising only the leg rest,
keeping the footrest lowered in the vertical position as
shown in the figure.
15 DUETTE FRAME PIROET+ SEGGIOLINO DUETTE
POP-UP + POP-UP BASSINET
Figure A shows the positions in which the products
may be installed.
16 DUETTE FRAME PIROET+ 2 PRIMO VIAGGIO SL CAR
SEATS Figure A shows the positions in which the
products may be installed (facing mom).
17 DUETTE FRAME PIROET+ PRIMO VIAGGIO SL CAR
SEAT + SEGGIOLINO DUETTE POP-UP Figure A
shows the positions in which the products may be
installed (facing mom).
TRIPLETTE PIROET FRAME
18 TRIPLETTE PIROET FRAME + 3 POP-UP SEATS
Figures A and B show the positions in which the
products may be installed.
19 TRIPLETTE PIROET FRAME + 3 PRIMO VIAGGIO SL
CAR SEATS
Figure A shows the position in which the products may
be installed (facing mom).
20 TRIPLETTE PIROET FRAME + 2 PRIMO VIAGGIO SL
CAR SEATS + 1 POP-UP SEAT
Figure A shows the position in which the products may
be installed.
The two car seats should be installed closest to the
handle bar (all facing mom).
TRIPLETTE PIROET FRAME + 1 PRIMO VIAGGIO SL
CAR SEAT + 2 POP-UP SEATS
Figure B shows the position in which the products may
be installed.
The car seat should be installed closest to the handle
bar (facing mom).

SERIAL NUMBERS

21 Information about the production date can be found
on the Duette Piroet / Triplette Piroet.
_ The product name, production date and serial number
of the chassis.
This information is required for any complaints.
THE ORIGINAL ACCESSORY PEG-PEREGO
Peg-Perego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product's accessories on
www.pegperego.com

CLEANING AND MAINTENANCE

Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic parts
with a damp cloth. Do not use solvent or similar cleaning
products; keep all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms, locking
mechanisms, wheels, ...) and free of dust and sand and, if
necessary, lubricate with light machine oil.
PEG-PÉREGO S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Pérego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
number of the product, if present.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.it
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PEG PEREGO S.p.A. and are
protected by the laws in force.
- 14 -