LEXIBOOK Move Cam Touch Mode D'emploi page 29

st
e mount
nd
DJA200_01IM1264_26Jun_V02.indb 29
3. Choose (one, more, none) connector from the three given above ,
and then fix them to the connector (3).
4. Fix the connector (2) that have a metal screw on it to the last
connector.
5. Fix the tripod slot of the camcorder to the metal screw of the mount
(2) respectively.
6. Adjust those screws to make the camcorder more steady and
convenient.
7. After fixing the camcorder to the mount correctly, using a strap to fix
them to the helmet.
Insert a strap into the two ends of the main mount (B), adjust length
according to the helmet's size, and tie the strap up to your helmet.
Helmet mount without strap
Attach the rubber sticker onto the back of the waterproof casing and
then stick it onto your helmet. Or, attach the camcorder onto the tripod
and attach the rubber sticker on the helmet mount and then stick it
onto the helmet.
Note: When engaging in extreme sports, it is not recommended to
only use the sticker to attach the camera without the additional use
of a strap. Alternatively, you can purchase a more durable sticker for
such activities.
29
26/06/2014 1:56 PM