Technical Data - EINHELL HOME 43.003.45 Mode D'emploi D'origine

Anleitung_TH_MS_2513_T_SPK1__ 11.06.12 08:11 Seite 17
machineʼs design and setup:
Contact with the saw blade in the uncovered saw
n
zone.
Reaching into the running saw blade (cut
n
injuries).
Kick-back of workpieces and parts of
n
workpieces.
Saw blade fracturing.
n
Catapulting of faulty carbide tips from the saw
n
blade.
Damage to hearing if essential ear-muffs are not
n
worn.
Harmful emissions of wood dust when the
n
machine is used in closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

AC motor
Power
Operating mode
Idling speed n
0
Carbide saw blade
Number of teeth
Extractor socket
Base area
Weight
For use as a bench-type saw:
Saw bench
Cutting depth
Maximum cross-section of the
workpiece
Minimum size of the workpiece
Cutting depth
Parallel stop Can be pivoted from -45° to + 45°
For use as a crosscut saw:
Swiveling range
Miter cut
Saw width at 90°
Saw width at 45°
Saw width at 2 x 45°
(double miter cut)
Minimum size of the workpiece
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
230V ~ 50 Hz
1800 W
Total vibration values (vector sum of three directions)
S1
determined in accordance with EN 61029.
4,500 rpm
Vibration emission value a
ø 250 x ø 30 x 2.8 mm
K uncertainty = 1,5 m/s
36
Warning!
Diameter 35 mm
The specified vibration value was established in
490 x 318 mm
accordance with a standardized testing method. It
13.5 kg
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
416 x 352 mm
max. 40 mm
The specified vibration value can be used for initial
assessment of a harmful effect.
15.5 x 40 mm
Keep the noise emissions and vibrations to a
30 x 10 x 100 mm
minimum.
Only use appliances which are in perfect working
0 - 40 mm
n
order.
Service and clean the appliance regularly.
n
Adapt your working style to suit the appliance.
n
Do not overload the appliance.
n
Have the appliance serviced whenever
n
necessary.
0° to 45° to the left
50 x 10 x 100 mm
uncertainty
= 2,02 m/s
h
2
GB
-45° / 0° / +45°
130 x 75 mm
120 x 50 mm
70 x 35 mm
93 dB(A)
3 dB
106 dB(A)
3 dB
2
17