emerio MIS-123774.1 Mode D'emploi page 8

1. Before cleaning, cut off the power, unplug the appliance and wait for the fan motor to completely stop
rotating.
2. Clean the dirt on the surface of the fan, which can be gently wiped off with a clean and soft cloth.
3. Please use a soft cloth or the narrow-slit suction nozzle of the vacuum cleaner to clean the dust on the
outside of the fan or fan blades.
4. Do not rinse directly with water.
5. Do not wipe with thinner, toluene, acid lotion and oil. Do not wipe the fan body with detergent to avoid
discoloration and deterioration.
6. For storage after cleaning, please wrap it with original packaging materials and store in a dry place.
7. If you do not use it for a long time, please completely drain the water inside the water tank and the water
tank seat. Place the water tank in a dry and well-ventilated place. After the whole machine is dry, you can
pack it for storage.
Please remove the water tank from the main body before cleaning and maintenance.
■ Cleaning and maintenance of water tank (daily)
If the water tank is dirty, please soak the water tank with a diluted neutral detergent of kitchen for 5-10
minutes. After the dirt is dissolved, pour out the sewage and wipe dry. Please wash off the detergent carefully,
otherwise it may not work properly or cause detergent ingredients to be sprayed. Be sure to use the neutral
detergent of the kitchen. If chlorine-based, acid-based, and enzyme-based detergents remain inside the
product, toxic gas may be generated, which is very dangerous.
■ Cleaning and maintenance of the water tank seat (the place where the water tank is located) (daily)
1. Use a dry cloth to soak up the remaining water in the water tank seat. If there is still have water, please
repeat the action of soak up.
2. Please gently wipe the inside of the tank seat with a soft damp cloth dampened with a little detergent.
3. Be sure to use the neutral detergent of the kitchen. If chlorine-based, acid-based, and enzyme-based
detergents remain inside the product, toxic gas may be generated, which is very dangerous.
4. Please wipe the ultrasonic vibrator gently with cotton swab after dabbed with detergent. (Fig.3)
5. Do not use too much force when cleaning, otherwise the product may be damaged or leak.
6. Please clean the inside of the water tank seat carefully, wipe off the moisture with a soft cloth and dry it.
7. Please wash off the detergent carefully, otherwise it may not work properly or cause detergent ingredients
to be sprayed.
- 7 -