emerio MIS-123774.1 Mode D'emploi page 7

2. Speed button: Press "
speed.
3. Mode button: Press "
Sleeping " " → ... (Repeating).
- Normal: The appliance works with the same wind speed all the time.
- Natural: Wind speed changes randomly with short time suspended.
- Sleeping: Wind speed changes generally from high to low with short time suspended.
4. Timer button: Press "
time has elapsed, the fan will be off and under standby condition.
5. Swing button: Press "
6. Mist button: Press "
separately under standby mode.
7. After use, switch off the appliance and unplug it. Note: Refill the water tank when the icon "
in red.
Note:
1. After the timer is set, the digital display will show back to the speed setting and extinguish in approx. 30
seconds. If you want to check the remaining working time, firstly press any button to illuminate the digital
display and then press the timer button. The remaining working time will be shown on the digital display.
2. Under standby mode, the mist function can be operable separately and users can set the desired working
time of the mist function. Firstly, press the mist button to turn on the mist function and then press the
timer button to set the desired working time. When the set time has elapsed, the mist function will be off.
CLEANING AND MAINTENANCE
Clean and maintain the product in the following situations.
• After use
• Changing water
• Used again after long-term storage
" to adjust the speed: 1= low wind speed; 2= medium wind speed; 3= high wind
" to choose the mode functions from Normal "
" to set your desired working time from 1h →2h →3h ... →9h →off. When the set
" to control the oscillation function on or off.
" to control the mist function on or off. Mist function can also be operable
- 6 -
" → Natural " " →
" flashes