To Check The Phone To Pc Connection; To Disconnect Your Phone From Your Pc - LG Optimus P970G Mode D'emploi

If you have previously connected
2
using a cable, run the New
Connection Wizard to create a
new connection.
Run the Connection Wizard on
3
the computer, select "Bluetooth
connection", then "Next".
The wizard starts searching for
4
Bluetooth-enabled mobile phones.
When the mobile phone that you
wish to connect to appears, click
"Stop" to stop searching.
Select "LG-P970G" from the
5
device list and click "Next". You
can rename the device if you
wish.
Enter the PIN code (e.g. "0000")
6
and click "Next".
On your mobile phone, accept the
7
request and enter the same PIN
code, then touch "OK".
Enter the On-Screen Phone
8
password and click "Next" (the
default password is "0000").
Touch "OK" to exit.
9
To check the phone to
PC connection
Once the devices have been
connected, drag down the notification
bar at the top of the home screen
to check the On-Screen Phone
connection status.
To disconnect your
phone from your PC
Click in the top left of the On-
Screen Phone window. Or drag
down the notification bar at the top
of the home screen and select "On-
Screen Phone". Touch "Yes" in the
Disconnect window.
NOTE: You must restart your phone
after shutting down the On-Screen
Phone service.
105