Lea LE34055-51DR Mode D'emploi page 15

Warning! Before performing any work on the equipment, pull the power plug.
Check your machine regularly before starting the work.
-
Damaged cutting blades have to be repaired or exchanged by a qualified service man
-
before working with the machine
After each cutting operation, clean the cutting blade with a soft brush and cloth with
-
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
Always keep the ventilation slots in motor housing clean
-
Never clean or spray a machine with water .clean the motor housing only with a moist
-
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine. Finally, dry the motor housing carefully.
Store the machine with the supplied protection cover.
-
Only use original accessories and spare parts.
-
9. WARRANTY
This product is warranted for a 2-year period effective from the date of purchase by the
-
first user.
This warranty covers all material or production flaws excluding: batteries, chargers,
-
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
-
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
-
tool.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
-
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is
-
the result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation,
-
excessive dust penetration, intentional damage (on purpose or by gross carelessness),
inappropriate usage (use for purposes for which the device is not suitable), incompetent
usage (e.g. not following the instructions given in the manual), inexpert assembly,
lightning strike, erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
-
period nor commencement of a new warranty period in case of a device replacement.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
-
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
-
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
-
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
14