Lea LE34055-51DR Mode D'emploi page 13

the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
-
left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better
-
control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
-
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving
parts.
If devices are provided for the connection of dust extraction and collection facilities,
-
ensure these are connected and properly used. Use of these devices can reduce dust
related hazards.
5.4 Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
-
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
-
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
-
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
-
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
-
parts and any other condition that may affect the power tool's operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
-
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
-
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
Have your power tool serviced by a qualified person using only identical replacement
-
parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY WARNINGS FOR HEDGE TRIMMERS
Keep all parts of the body away from the cutter blade. Do not remove cut material or hold
material to be cut when blades are moving. Make sure the switch is off when clearing
jammed material. A moment of inattention while operating the hedge trimmer may result in
serious personal injury
Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting
-
or storing the hedge trimmer always fit the cutting device cover. Proper handling of the
.
12