Available Functions; Loft Monitor - Fermax LOFT DUOX Manuel D'installation Et D'utilisation

L L L L L OFT DUO L L L L L OFT DUO OFT DUOX X X X X OFT DUO OFT DUO OFT DUO OFT DUO OFT DUO OFT DUOX X X X X
OFT DUO
CN1
Bin, Bin: data, audio and video input.
Bout, Bout: data, audio and video output (cascade connection).
T, -: Call Button for Residential Door (P1)
A+, -: Call extension connection ref 2040 / Light and bell activator ref.
F1: Additional functions (negative output "-" / send command, see Monitor Loft chapter: Buttons - F1
Button: Auxiliary function F1).
CN2: flat monitor connection cable.

Available Functions

The functions available on the Loft Duox monitor are summarised in the following list:
- Open door
- Call to guard
- Call Volume Regulation
- Call disconnection (Do not Disturb)
- Ring tone Selection
- Doorbell
- Programming via the terminal and via the entry panel
- Audio Volume Regulation
- Configuration of Parameters via screen menu (OSD)
- Brightness, contrast and colour settings
- F1 and F2 auxiliary functions

LOFT MONITOR

Buttons
Lock Release / Call Guard Unit Button.
· While in conversation with the Street Panel (only video or audio+video), pressing it will
activate the open door lock-release.
· When you press this button with the telephone hung-up (standby) a call will be made to the guard
unit (where one exists).
Auto-start button.
Select the Block's or General Entrance's camera (depending on availably in the instal-
lation, see Operations chapter: Auto-start.)
F1 Button
F1
Auxiliary function (negative output "-" / sending command
Auxiliary F1 function .
The F1 button and F1 terminal have the option of being configured. You can select
between Sending a negative (output) and Panic call to the Guard Unit (input).
It is initially configured, by default, as an output and sends a negative "-".
F1
F1
MENU
MENU
2438
Page 5