Before Using Your Appliance For The First Time; Preliminary Cleaning; Initial Burn-In; Subsequent Cleaning - NEFF B 1554 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before using your appliance
for the first time
Preliminary
cleaning

Initial burn-in

Subsequent cleaning

Time of day

Setting the time
Take the accessories out of the oven.
Remove all packaging remnants, e.g. polystyrene
parts, from the oven.
1.
Clean the appliance exterior with a soft
moistened cloth.
2.
Remove the shelf supports and telescopic rails
from the oven.
3.
Clean the oven and the accessories with a hot
detergent solution.
Please observe the operating instructions
furnished with the hob.
Before using the appliance for the first time, you
must set the time on the electronic clock.
Heat the empty oven for approx. 30 minutes.
Select top and bottom heat at a setting of 240° C.
Clean the oven with a hot detergent solution.
Install the shelf supports and telescopic rails.
After connecting to the mains, or after a power
0:00
failure, the display
Press the
button and set the current time with
>
the rotary knob (e.g.
To correct the time, press the
symbol flashes.
Then set the time.
Note: The time cannot be corrected if an automatic
function has been set (see Electronic clock for
cancelling automatic function).
will blink.
15:00
Uhr).
button until the
>
53

Publicité

Table des Matières
loading

Table des Matières