LENCO PBA-830 Mode D'emploi page 8

Or connect the supplied charging cable with the micro USB plug to the micro USB input IN on the spare battery. Then
plug the USB connector into a free USB port on your computer or use a mains adapter with a USB socket (not included
in delivery). It will start charging immediately.
The blue indicator lights on the charging display show the current capacity of the spare battery while it is charging
(P=20% - O=40% - W=60% - E=80% - R=100%):
•Indicator light is off - charging capacity not reached
•Indicator light is flashing - being charged
•Indicator light lights up - capacity reached
Once all five indicator lights are lit up, the spare battery is fully charged.
Because of the lower voltage, charging the spare battery via computer takes significantly longer than if you charge the
spare battery using a mains adapter.
Charging battery-operated mobile devices
EN
NL
DE
FR
You should also refer to the instruction manual of your mobile device.
ES
OUT 1 A OUT 2A
IN
08