Technical Data - ECE proFIT SLM Mode D'emploi

1. DESCRIPTION
GCE proFIT SLM is portable oxy-fuel
®
cutting machine that cuts unalloyed steel by
material combustion with using of oxygen –
fuel gas preheating flame. This machine can
also be used for linear and circular cutting
or for cutting curved (patterned) profiles
(figures) by moving manually or by installing
additional parts. There is an option to use
second cutting torch if necessary.
GCE proFIT SLM can be used for straight
®
cutting, curved cutting or bevel cutting with
one or two cutting torches at maximum.
Maximal material thickness to be cut is
150 mm with one cutting torch and 100 mm
with two cutting torches.
Complete machine consists of more parts
to be ordered separately, please see
instructions and recommendation below.
GCE proFIT SLM machine can also be used for plasma cutting, preheating and welding but
®
with additional equipment (not supplied with the machine) and by making necessary changes.
These operating instructions explain safe and efficient operation of GCE proFIT
GCE proFIT® SLM portable cutting machine should be used taking the warnings specified in the
instructions into consideration.
Operators of the machine shall have learnt the content of this Instruction for Use and shall be
experienced with oxy-fuel equipment and trained according to request of ISO, EN or national
standards with respecting all requests of legal authorities.
2. FEATURES

2.1. TECHNICAL DATA

Cutting capacity
Cutting speed
Operation
Power supply
Engine supply
Oxygen inlet connection
Fuel gas inlet connection
Machine dimensions
Weight
Fig.1 Machine GCE proFIT
up to 150mm with one torch, up to 100mm with two
torches
50-1600mm/min
forward and reverse with variable speed
230V AC / 110V AC
24V DC
G1/4", up to 8bar, hose min. DN6
G3/8"LH, up to 1bar, hose min. DN8
175x350x140 (WxLxH) without torch, hoses and torch bar
9 kg with one torch
3/136
with Zn-coated guide rail
®
EN
SLM
®
SLM .