Selecting A Frequency - Virax Visioval VX Manuel D'utilisation

4.2 Selecting a frequency

NOTE!
Only transmission at 9.2 kHz is authorized in Europe. The camera head is therefore reset to 9.2 kHz
whenever the camera system is restarted.
The camera head is therefore set to 9.2 kHz by default.
2- Start by checking the frequency of your camera head.
(Camera instruction manual, chapter 6 "Settings from the camera menu").
NOTE !
If the "Auto" function has been selected, the locator can only locate the head within a range of
1 m.
• The following locator options are available: 8.9 kHz, 9.2 kHz and
Auto
• The locator is set to 9.2 kHz by default
• If "Auto" is selected, the locator will automatically determine the
frequency of the camera head transmitter.
16