How To Attach The Stand; How To Remove The Stand - Sansui HDLCDVD225 Guide D'utilisation

How to attach the stand

NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid
any damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its back onto a table.
Align the stand's bottom-plate (supplied) as seen here.
It will fi t in only one direction.
Press it in direction of arrow until you hear a 'click'.
Please assure the " " mark on the stand is facing the
LCD panel side.

How to remove the stand

When you transport this product, remove the stand and pack separately.
For wall mounting, the base must be removed. To do this, remove 2 screws from the back (see page 5).
6
Finally secure the bottom-plate with 2
screws (supplied).
If necessary, remove the screws.
Insert a fl at screwdriver etc. to
four slots. Release the lock by
pushing the screwdriver down
carefully toward each inner side
(center direction of stand). Then
remove the stand.