Rigiet Stable Horizon Mode D'emploi page 56

6. Rigiet App

Firmware version and upgrade
If upgrading versions available for the firmware of Rigiet you can
click "Upgrade" to upgrade Rigiet. During upgrade keep Rigiet in
charging state, and keep a stable communication between the
phone and Rigiet. Otherwise, the upgrade may fail.

Joystick control setting
Set the joystick control direction and sensitivity.

Battery capacity
Check the battery capacity of Rigiet: Click the status bar of the
app to enter the "Expanding page" and the remaining battery
capacity is displayed on the top right corner.

Gyroscope calibration
The gyroscope calibration is mainly used in case of environ-
mental temperature changes, i.e. a gyroscope calibration is
required each time the Rigiet enters an environment of different
temperature. Otherwise, when the stabilizer is in lock mode the
yaw axis will slowly drift. This does not affect other follow modes.

Remote control
that is networked via Rigiet app and Bluetooth with the first one,
which is located on the Rigiet. Max. distance between
smartphones should not be more than 3 m. The remote control
function is mainly used for a close range vision angle and posture
adjustment.

Follow speed setting
The yaw follow speed setting option is used for adjustment of the
Yaw follow speed, and the pitch follow speed setting option is
used for the adjustment of the Pitch follow speed. The value of
20, 40, 60, 80, 100 represents the percentage of the current
follow speed in the standard follow speed.
1. Clicking the "Gyro Calibration"
key.
2. Place the stabilizer on a stationary
platform such as the desktop.
3. Carry out calibration according to
the prompt given on the interface.
The calibration takes only 5 seconds.
The remote control function is used to
set the rotation control and one-button
centering from a distance without
carrying Rigiet in your hand. E.g. if it is
attached to a tripod. The remote control
is carried out via a second smartphone
56