Rigiet Stable Horizon Mode D'emploi page 45

5.10 Power & shooting button
1.
2.
3.
5.11 Multi-function composite 3-position zoom
control switch
The switch automatically swings back to its original position after
being pushed up and down and released.
1. Tackling up a short time, < 1 second and release.
Such operation enables switching between the front and rear
cameras.
Only possible if Rigiet is connected with the Rigiet App.
2. Tackling down for a short time, < 1 second and release.
Such operation enables switching of shooting modes.
Only possible if the Rigiet is connected with the Rigiet App.
3. Tackling up or down for a long time, > 1 second and
release.
Such operation enables zooming of image.
Only possible if Rigiet is connected with the Rigiet App.
45
Pressing and holding for < 1 second = tapping.
Such operation will activate / deactivate shooting if
the Rigiet App is connected and if the Rigiet App is
not connected such operation is ineffective.
Pressing and holding for 1 - 2 seconds.
Such operation enables switching between the
stand-by mode and normal mode.
Pressing and holding for > 2 seconds. Such
operation will turn on or turn off Rigiet.
5. Operating