Operating; Initial Commissioning; Inserting Battery - Rigiet Stable Horizon Mode D'emploi

5. Operating

5.1

Initial commissioning

5.2

Inserting battery

Rigiet is designed for use with replaceable battery. To ensure a correct
installation, the battery must be used as indicated in the following steps:
5.3 Inserting the phone
1. Turn on the phone holder adjustment scroll to loosen the
phone holder to a width that enables phone insertion.
2. Insert the smartphone in a way that it is close to the engine,
and fix it by turning the phone holder adjustment scroll.
41
• Screw out the battery tailstock
• Remove the insulating spacer
• Screw the battery tailstock
• Charge the battery completely.
1. Screw out the battery case cap.
2. Insert the battery into the handle
according to its correct placement
direction.
3. Screw in and tighten the battery case
cap.
+
Material damage
• If your smartphone has a protective cover
remove it before attaching the smartphone
to Rigiet.
• Do not start Rigiet to the stabilization
before the phone is inserted correctly.
5. Operating
after unpacking.
in the battery compartment.
tightly again.
-