Device Description - Kress Elektrowerkzeuge 530FM Mode D'emploi Original

Device description

3. Device description
Read all the warnings and instruc-
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Device components
1 Locknut
2 Collet chuck
3 Spindle
4 Locking button
5 On/off switch
6 Speed governor turning wheel
7 Mains cable module
8 Locking for mains cable module
Illustrated or described accessories
are not necessarily included in the
scope of delivery
Scope of supply
See packaging
Specified Conditions of Use
The fitted milling and grinding motor is designed
for milling wood and plastics and for grinding
wood, plastic, steel and aluminium. The motor
must not be guided by hand without appropri-
ate milling attachments.
Requirements for the user
The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.
Technical data
Milling and grinding motor
Input power
Output power
Idle speed
Speed for rated load
Tool fitting with collet
chuck ø
Grinding tool ø , max.
Milling-ø
Dimension
Weight
Protection class
Milling and grinding motor
Input power
Output power
Idle speed
Speed for rated load
Tool fitting with collet
chuck ø
Grinding tool ø , max.
Milling -ø
Dimension
Weight
Protection class
Milling and grinding motor
Input power
Output power
Idle speed:
1050FME
1050FME-1
Speed for rated load
Tool fitting with collet
chuck ø
Grinding tool ø , max.
Milling-ø
Dimension
Weight
Protection class
English 17
530FM
Watt 530
Watt 270
-1
min 29.000
-1
min 14.300
mm 22
mm 40
mm 30
mm 240x73
kg 1,3
800FME
Watt 800
Watt 420
-1
min 10.000-29.000
-1
min 25.000
mm
mm 40
mm 36
mm 262x73
kg 1,4
1050FME
Watt 1050
Watt 600
-1
min 10.000-29.000
-1
min 5.000-25.000
-1
min 24.800
mm
mm 40
mm 36
mm 289x73
kg 1,7
FME-EN / 1101
EN
II
8
II
8
II