Disposal; Troubleshooting - MC Crypt CDMP-68U DJ Notice D'emploi

13. Maintenance
The device does not need any servicing. The device's outside should be cleaned with a soft, dry cloth or a brush.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the casing.

14. Disposal

Dispose of the product according to the applicable statutory provisions at the end of its service life.

15. Troubleshooting

By purchasing this CD player, you have acquired a product designed to the state of the art and operationally relia-
ble. Nevertheless, problems or errors may occur. The following contains descriptions for the removal of possible
interference.
Always observe the safety information!
The display is blank after the power switch (32) was switched on.
• The mains cable is not plugged into the socket correctly.
The CD is not played.
• CD has not been put into the tray properly.
• The CD is dirty.
• The inserted CD is not an audio/MP3 CD or a CD-R.
• Switch to another CD manufacturer if your CD-R is not recognised or played back.
The CD skips during playback.
• The CD is dirty.
• The CD is scratched.
• The CD has a pressing defect.
• The device is subject to vibration when playing.
• Use a lower burn speed when writing your audio CD.
• Change CD manufacturer should problems occur on playback of your CD-R.
The MP3 files are not played back
• Do not create any mixed CDs with MP3 files and other audio files.
• Use a lower burn speed when writing your MP3-CD.
• Burn your MP3-CD with the universal file standard ISO 9660.
The PITCH slider (23) does not work.
• The PITCH function is deactivated.
51