Using The Built-In Troubleshooting Feature - Whirlpool WED97HEXL0 Guide D'utilisation Et D'entretien

SPECIAL INSTRUCTIONS
FOR STEAM MODELS
Water Inlet Hose
Replace inlet hose and hose screen after 5 years of use
to reduce the risk of hose failure. Periodically inspect and
replace inlet hose if bulges, kinks, cuts, wear, or leaks
are found.
When replacing your inlet hose, record the date
of replacement.
To Winterize the Dryer
1. Unplug dryer or disconnect power.
2. Shut off water faucet.
3. Disconnect water inlet hose from faucet and drain.
To Use the Dryer Again
1. Flush water pipes. Reconnect water inlet hose to faucet.
Turn on water faucet.
2. Plug in dryer or reconnect power as described in the
Installation Instruction.

USING THE BUILT-IN TROUBLESHOOTING FEATURE

1.
Press MORE INFO
With the dryer on, press MORE INFO to access the built-in
HELP feature.
14
2.
Select TROUBLESHOOT
Use the LCD control buttons to select TROUBLESHOOT. Then use
the LCD control buttons to select the HELP topic. The
buttons can be used to advance through the different options.
and