Lenze ECSZZ020X4B Instructions De Montage page 10

2 Sicherheitshinweise
Restgefahren
(
Stop!
Kein Geräteschutz gegen zu hohe Netzspannung
Der Netzeingang ist intern nicht abgesichert.
Mögliche Folgen:
Zerstörung des Gerätes bei zu hoher Netzspannung.
ƒ
Schutzmaßnahmen:
Beachten Sie die maximal zulässige Netzspannung.
ƒ
Sichern Sie das Gerät netzseitig fachgerecht gegen Netzschwankungen
ƒ
und Spannungsspitzen ab.
O
Warnings!
Conditions of Acceptability:
The equipment leakage current in the grounding conductor should be
ƒ
measured to detemine compliance with the end use requirements.
Suitability of the leakage current values must be determined in the
end−use application.
Electrical spacings between uninsulated live metal parts and unsinsulated
ƒ
dead metal parts should be in accordance with the end use product.
The terminals have not been investigated for field wiring use.
ƒ
The insulation system for the inductor windings have only been evaluated
ƒ
for a Class 105 insulation system.
When the filter air ambient temperature in the end use product differs
ƒ
significantly from 40 °C, consideration should be given to conducting a
temperature test with the filter installed in the end use product.
The suitability of the grounding means, in conjunction with the filter, shall
ƒ
be evaluated in the end use product.
The filter should be provided with an overall enclosure suitable for the
ƒ
applicable end product requirements.
Case temperature should be monitored in the end product.
ƒ
The filter exceeded the voltage allowed after a view seconds during the
ƒ
Capacitor Discharge Test, Section 37, of UL 1283. Bleeder resistors may be
necessary in the end−product to comply with the applicable end−product
requirements.
10
l
EDKCSZZ040 DE/EN/FR 3.1