Upgrading The Firmware - Lindy 32400 Manuel Utilisateur

User Manual
Autoscan Mode
Scroll
+
Lock
Autoscan mode automatically cycles through each connected computer. The scan interval is 8
seconds.
SPACE BAR
Beep Function
Scroll
+
Lock
This command switches the beep on or off during Autoscan or when the front panel button is
pressed. The factory default value is ON.
Note: When you enter hotkey mode the beeper remains on for command confirmation, but key
presses within hot key mode do not beep!

Upgrading the Firmware

The CPU Switch Smart Audio's firmware can be upgraded for future improvements and to
support future new functions of mice, keyboards, motherboards etc. There's no need for any
extra cables or connection - the firmware is copied to the switch over the PS/2 connections.
1. The upgrade program must be run from a Windows PC connected to Port 1 on the CPU
Switch Smart Audio
2. Please contact LINDY Technical Support to obtain the upgrade program. The upgrade
software consists of the files illustrated below –
3. Once you have obtained the software you need to run the Setup program –
4. The following window will appear. Click OK, then restart your computer
Scroll
S
+
Lock
Scroll
B
+
Lock
= select Autoscan
= exit Autoscan
= Beep on/off (Autoscan/front button & hotkey mode)
6
English