Built-In Cd Player; Playing A Cd - Pioneer DEH-1430R Mode D'emploi

Built-in CD player

Playing a CD

1
1
TRACK NUMBER
Shows the track currently playing.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
• You can eject a CD by pressing
2 After a CD has been inserted, press
to select the built-in CD player.
SOURCE
3 Use to adjust the sound level.
VOLUME
When you press
VOLUME
raised and when pressed down/–, the volume is
lowered.
11 En
2
indicator
CD EJECT
up/+, the volume is
4 To perform fast forward or reverse, press
and hold 2 or 3.
5 To skip back or forward to another track,
press 2 or 3.
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
CD EJECT
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 17.
.
to eject the disc, and check
ERROR-14
may