Before The First Use - Fritel GRILL & TWIST GT 2195 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 ALWAYS switch off the appliance and pull out the plug: after use or when the
appliance is not in use, if the appliance doesn't work properly and when cleaning
the appliance
 NEVER pull the power cord, but only the plug.
 According to the legal safety standards, the appliance must always be connected to
an earthed socket.
 NEVER use extension cords or sockets. Place the appliance near a power point and
connect it directly. ALWAYS complete unroll the power cord.
 NEVER place the power supply cord near heat sources such as cookers, heatings or
ovens.
 NEVER cover the appliance when it is working.
 Only use original accessories
 Repairs may only be done by a recognized repairer or service centre.
II. ASSEMBLY HANDLE
1. Take the handle in one hand and squeeze both pins inwards.
2. Bring the handle in front of both openings in the drawer.
3. First insert the left pin in the opening.
4. Then insert the right pin in the opening and release the handle. The handle is now
in place.
III. BEFORE THE FIRST USE
 Remove all packaging and stickers. Keep all packing material out of children's
reach.
 Before using the appliance for the first time, it is recommended to clean it (see
'Maintenance and cleaning of the appliance and spare parts')
 First assemble the handle on the drawer (see 'Assembly handle')
 Then assemble the appliance correctly.
 Ensure that the voltage marked on the appliance is the same as your main voltage.
1
2
1
3
19
4

Publicité

Table des Matières
loading

Table des Matières