Using The Lcd Monitor; Switching On The Monitor - Dometic GROUP WAECO PerfectView M70IP Instructions De Montage Et De Service

Using the LCD monitor

8 Using the LCD monitor
8.1

Switching on the monitor

➤ With the monitor switched off, press the "P" button on the monitor (fig. 0 7, page 6)
or the "P" button on the remote control (fig. a 3, page 7) to switch on the monitor.
✓ The picture appears.
8.2 Switching off the monitor
➤ Press the "P" button on the monitor (fig. 0 7, page 6) or the "P" button on the remote
control (fig. a 3, page 7) to switch off the monitor.
✓ The picture disappears.
Setting the language (fig. 0, page 6)
8.3
The default language is English.
To set the language, proceed as follows:
➤ Press the "M" button (3) twice to open the "Options" menu.
✓ The "Lang" parameter is displayed at the top in the menu.
➤ Use the "–" (5) and "+" (6) buttons to select the desired language:
English/Deutsch/Français/Español/Português/Italiano/Nederlands/
✓ The display indicates the desired language.
38
PerfectView M70IP
EN