Philips S91 Serie Mode D'emploi page 39

6 Put the shaving heads back into
the shaving head holder.
Note: Make sure the notches on both
sides of the shaving heads it exactly onto
the projections in the shaving-head holder.
7 Place the retaining ring holder
on the retaining ring (1), place it
on the shaving head (2) and turn
it clockwise (3) to reattach the
retaining ring.
Repeat this process for the other
retaining rings.
Note: Hold the shaving head holder in
your hand when you reinsert the shaving
heads and reattach the retaining rings.
Do not place the shaving head holder
on a surface when you do this, as this
may cause damage.
8 Reattach the shaving head
holder to the bottom part of the
shaving unit.
ENGLISH
39