baltur BTG 15P Manuel D'installation, Utilisation Et Entretien page 40

COMBINED DUNGS GAS VALVE (monobloc) MOD. MB-ZRDLE...B01
electrical connections
E
N
G
L
I
S
H
flow direction
entry flange
pressure stabilizer bleed
1 Locking screw for 1st and 2nd flame regulators
2 Cover for regulating screw of pressure stabilizer
3 Gas pressure switch (minimum)
4 Safety valve
5 Pressure tap at gas entry
6 Filter
7 Pressure tap after pressure stabilizer (Pa)
8 Principle valve (1st and 2nd flame)
9 Regulating ring 1st flame delivery
10 Regulating knob 2nd flame delivery
11 Protective cover (can be used as a knob) of regulating device for the initial rapid release.
12 Gas pressure switch (maximum)
Note: to increase delivery, rotate the delivery devices in an anti-clockwise direction; to decrese
delivery, rotate them in a clockwise direction.
pressure stabilizer
16 / 20
0006080895_200903
N° 0002910311
REV.:13/01/2004
pressure tap at valve exit
exit flange
plug