Care And Maintenance - Virax VULCA D63 Manuel D'utilisation

TROUBLE-SHOOTING
If theVIRFUS D63 does not operate correctly, check
the following points:
• Check that the unit is connected to a functioning
power source of the correct voltage (230 V ) ?
• Check that the temperature regulator is in the
correct position ?
if the unit still does not work proper y, contact our
occasional representative or distributor.
STORAGE
When the equipment is no longer going to be used,
you are recommended to turn it off and allow it to cool
in order to store it.
Store it carefully in a locked, dry place out of reach of
children.
PRECAUTION
If the socket welding device is packed into its
storage case while it is still hot, take care to
place it in the correct position.
Incorrect storage could damage the equipment
and the storage case.
Fig 16 Storing the socket welding device

CARE AND MAINTENANCE

Inspect the adapters before using them. Carefully
remove any material remaining from previous we ding
operations.
PRECAUTION
Do not use metallic items or solvents to remove
residues, as these could damage the surface of the
adapter.
NOTE
Check the condition of the adapters from time to time,
to ensure correct welding
When its useful life is over, do not dispose or
the machine into the domestic waste, please
send it to authorized places for recycling.
F
27