Adjusting The Focus; Using The Microscope - Velleman CAMCOLMS2 Mode D'emploi

5. Overview
Refer to the illustrations on page 2 of this manual.
1 5 VDC + USB port
2 HDMI port
3 microSD slot
4 LED dimmer
5 on-off
6 mode
7 menu
8
capture/OK
9
down
6. Installation
Refer to the illustrations on page 3 of this manual.
1. Put the base on a flat and stable non-slippery surface. Slide the frame into the base hole and
tighten with the nut (see fig. I1).
2. Slide the microscope into the frame and tighten the screw (see fig. I2).
3. Adjust the height of the microscope to the desired height (see fig. I3).
7.

Adjusting the Focus

Refer to the illustrations on page 4 of this manual.
1. Rotate the coarse focus wheel to get the first focus (see fig. F1).
2. Rotate the fine focus wheel to refine the focus (see fig. F2).
3. Fix the microscope with the locking wheel (see fig. F3).
8.

Using the Microscope

8.1 Connection
1. Connect the microscope to a powered USB port.
2. Connect the microscope to the TV set or monitor using the HDMI cable.
3. Switch on the TV set or monitor and select the HDMI setting.
4. Switch on the microscope
8.2 Taking a Picture
1. Insert a microSD card (max. 32 GB SDHC) into the microscope.
2. Place an object under the lens. Turn the focus wheel to focus the image of the object to its best.
3. Press the capture button to take the picture and save it onto the microSD card.
8.3 Playback
1. Make sure the microscope is loaded with a microSD card.
2. Press the mode button to switch to the playback mode.
3. Press the down button to view the previous picture; press the mode button to return to the preview
mode.
8.4 Storing
You can store all your pictures on a microSD card or on your computer. To do so, connect the microscope
to the computer and transfer the pictures from the microSD card to the computer.
V. 01 – 20/09/2016
CAMCOLMS2
10 LEDs
11 fine focus wheel
12 magnification ruler
13 locking screw
14 locking screw
15 coarse focus wheel
16 coarse focus wheel
17
locking screw
6 ©Velleman nv